Tutorials/ko

자주하는 질문

인터페이스 맞춤화

Index

이 페이지는 고품질 자습서를 제공합니다. 정렬되지 않은 완전한 튜토리얼 목록은 Category:Tutorials(페이지 번역버튼 안보임)에서 찾을 수 있으며, 완전하고 정렬 가능한 튜토리얼은 아래 표에서 찾을 수 있습니다.

위키 문서 및 자습서 작성에 기여하고 싶다면 위키페이지의 일반 위키 지침을 참조하고 Tutorial guidelines(페이지 번역 버튼 안보임)을 읽어보세요.

일부 자습서에서는 이전 버전의 프로그램을 사용할 수 있으므로 튜토리얼에 사용된 FreeCAD 버전을 확인하십시오. 일반 모델링 프로세스는 계속 작동할 수 있지만 일부 도구는 변경되었을 수 있습니다.

동영상 자습서 와 책도 살펴보세요.

건축과 BIM

• 
  Arch_tutorial (v0.14)
  This is the essential introduction to the BIM Workbench. It is extensive and showcases a typical workflow, from importing plans in DXF format to building the 3D model.
• 
  BIM modeling
  How to model a small house, produce a blueprint with TechDraw, and export to IFC.
• 
  Open windows and doors (v0.18)
  How to display windows and doors as open, with elevation and plan symbols, and produce a basic floor plan with TechDraw.
• 
  Design custom windows (v0.18)
  How to draw custom doors and windows using the Sketcher, and adjust their normals to correctly place them in walls.
• 
  Arch panel tutorial (v0.15)
  Modeling a microhouse roof panel by using the Sketcher Workbench, the Window tool, and the Panel tool.
• 
  WikiHouse modelling
  Re-modeling the WikiHouse project using sketches and panels, starting from importing a mesh model created in SketchUp.
• 
  NativeIFC Tutorial
  Learn to work with native IFC files, objects and concepts in the BIM workbench.

• 
  Creating a simple part with Part Workbench
  An introduction to FreeCAD and Part Workbench using primitive solids.
• 
  Creating a simple part with Draft and Part Workbench
  An introduction to modeling solids with Draft Workbench by creating a 2d profile in draft.
• 
  Creating a simple part with PartDesign (v0.17)
  An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.
• 
  Basic Part Design Tutorial (v0.17)
  Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.
• 
  Basic Part Design Tutorial 019 (v0.19 or above)
  An updated version of the previous tutorial that creates the same model using techniques that avoid the topological naming problem.
• 
  Model an electric toothbrush head stand (v0.16 or above)
  Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.
• 
  Modeling for product design (v0.16)
  Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.
• 
  Traditional modeling, the CSG way
  Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.
• 
  Draft ShapeString tutorial (v0.19)
  Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.
• 
  Create a wiffle ball (v0.19)
  Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.
• 
  Basic modeling tutorial
  Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.
• 
  Aeroplane tutorial
  Understand placements in FreeCAD by creating a simple aeroplane model. Then learn about rotation angles, yaw (Z), pitch (Y), and roll (X).
• 
  Thread for screw tutorial (v0.19)
  Understand how to create threads with several techniques that include use of the tools Part Helix, PartDesign AdditivePipe, Part Sweep, Part Fuse, and Part Cut.

• 
  Traditional 2D drafting
  Draw a floor plan with lines, wires, rectangles, circular arcs, and add hatch patterns, annotations, and dimensions. Export the result to DXF.
• 
  Draft tutorial (v0.19)
  This is a basic introduction to the tools of the Draft Workbench: working plane, grid, line, arc, upgrade, rectangle, circle, polygon, arrays, dimensions, annotations, and shapestring.
• 
  Sketcher Lecture (v0.19)
  This is a more than 80 page PDF document that serves as a detailed manual for the Sketcher Workbench. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints.
• 
  Basic_Sketcher_Tutorial (v0.19)
  This is a basic introduction to the tools of the Sketcher Workbench: construction mode, line, circle, arc, constraints (equality, vertical, horizontal, tangential, distance, angle, radius).
• 
  Sketcher constraints practices (v0.19)
  Learn to efficiently constrain a sketch. Prefer geometric constraints over datum constraints.

• 
  Basic TechDraw Tutorial (v0.17)
  This is the essential introduction to the tools of the TechDraw Workbench: page, view, scale, vertical and horizontal dimensions, annotations, projection groups, linking dimensions to the 3D view.
• 
  Creating a new background template (v0.17)
  Instructions to create a page template in Inkscape for using it with the TechDraw Workbench. Determine the size of the sheet, draw a frame for the page, define fixed text, and editable text fields.
• 
  Measurement Of Angles On Holes (v0.19)
  Instructions for adding center lines and subsequent angle representations on holes.

• 
  FEM Geometry Preparation and Meshing (v1.0)
  This is a general reference for the most common issues related to geometry preparation and meshing for FEM. It contains several tips and explains the current capabilities of the FEM workbench in terms of geometry and mesh handling.
• 
  CalculiX cantilever FEM analysis (v0.20)
  This is an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport.
• 
  Simple FEM introduction (v0.20)
  This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.
• 
  FEM shear analysis of a composite block (v0.17)
  Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.
• 
  Analysis of reinforced concrete with FEM (v0.19)
  Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.
• 
  Electrostatic equation – Capacitance of two balls (v0.19)
  This example shows how to simulate a capacitance. It illustrates how to setup the example, study its various parts, solve it using the Elmer Solver and visualize the results using Clip Filter.
• 
  Post-Processing of FEM results with Paraview (v0.19)
  This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.

• 
  CAM Workbench for the impatient
  This is a quick presentation of the workflow for the CAM Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file.
• 
  Manual:Preparing models for 3D printing (v1.0)
  Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the CAM Workbench to generate the G-code.

• 
  Creating renderings
  Quickly produce a rendered image of your bodies with POV-Ray and LuxRender, if they are installed in your system.
• 
  Raytracing_tutorial (v0.16)
  Describes the basic workflow of the Raytracing Workbench using POV-Ray or LuxRender: set the path to the renderers, create a project, set the camera position, select the model, run the renderer.
• 
  Intermediate FreeCAD and POV-ray tutorial (v0.18)
  Workflow to produce a better render with POV-Ray: create a project, add objects, set the camera, save the .pov file, manually edit the file to improve the textures, planes, lights, and then run the renderer.
• 
  Rendering a FreeCAD assembly with Blender (v0.18)
  Export bodies from FreeCAD to Wavefront .obj, import the file into Blender, set up a simple Sun light, assign basic materials with the Principled BSDF shader, and produce a rendered image with EEVEE and Cycles.

• 
  Robot tutorial (v0.17)
  Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.

자습서 - 종합 목록

여기에 품질에 상관없이 매뉴얼에 없는 모든 튜토리얼이 나열되어 있습니다. 튜토리얼이 Category:Tutorials에 나열되어 있고 이 표에는 없으면 삽입해 주세요.

자주하는 질문

인터페이스 맞춤화

Index

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub